AmirAzari

Home/امیر آذری

About امیر آذری

This author has not yet filled in any details.
So far امیر آذری has created 253 blog entries.

Zinc Ethyl Silicate Coatings,Corrosion & Heat Resistance

Zinc Ethyl Silicate paints are inorganic coatings that have good heat & corrosion resistance. The zinc dust in these coatings will protect the metal substrates by cathodic protection (sacrificial anode). Zinc Ethyl silicate paints adhere to the surface strongly and make a barrier layer that no corrosive substances will penetrate [...]

By |2021-01-30T10:17:22+03:30January 30th, 2021|Uncategorized|0 Comments

Sea Stock Paints for Ship Board Maintenance

Keeping your ship in good condition while it is at sea will be easily achieved by sea stock paints. You and your crew know that without an onboard maintenance chart it is complicated to paint different areas of your vessel and protect them from corrosion. So, Darya Tamin with its [...]

By |2020-12-28T11:07:37+03:30December 28th, 2020|Uncategorized|2 Comments

Surface Tolerant Epoxy Mastic Corrosion Resistant Coatings

Surface Tolerant Epoxy Mastic paint is a high solid epoxy coating that has excellent anti-corrosive properties in severe corrosive situations. These coatings are compatible with aged coatings and have good adhesion to St3 prepared steel substrates. Surface tolerant epoxy coatings are specially formulated to be applied over surfaces with minimal [...]

By |2020-12-14T13:51:16+03:30December 14th, 2020|Uncategorized|0 Comments

Warehouses, How to Protect and Beautify

Warehouse steel structures should be protected from corrosion and beautiful. Being a new construction or not is important for painting, however, Darya Tamin has solutions for both. It is better to be a new construction because of less need for later maintenance but when maintenance is needed, applying with brush [...]

By |2020-12-07T13:46:38+03:30December 7th, 2020|Uncategorized|2 Comments

Offshore Coatings for Protection of Structures

Offshore structures are usually exposed to a severe corrosive environment including UV radiation, ice floats, waves, wet and dry cycles. These structures are installed in water so it is not possible to repair whenever you want.   The splash zone areas of an offshore asset suffer from atmospheric and immersion-type [...]

By |2020-12-05T11:06:56+03:30December 5th, 2020|Uncategorized|1 Comment

Potable Water Tank Coating, Health & Protection Together

To protect your fresh water tanks from corrosion, two-component solvent-free epoxy coatings are produced for you. All vessels have water tanks to store potable drinking water. Also, in some industries, this type of coating is widely used. These coatings are specially formulated for steel and concrete potable water tank protection. [...]

By |2020-11-23T13:47:55+03:30November 23rd, 2020|Uncategorized|2 Comments

Glass Flake Epoxy Coatings, Protection of Structures

Glass Flake Epoxy Paints are anti-corrosive coatings that protect structures against corrosion. Anti-corrosive glass flake pigments protect the substrates because there are so many tightly overlapping glass flakes in the coating which resist the permeation of gases and liquids is quite high relative to other types of coatings such as [...]

By |2020-11-15T09:03:46+03:30November 15th, 2020|Uncategorized|0 Comments

Zinc Rich Epoxy Primer, an Anti-corrosive Organic Coating

Zinc-rich epoxy paint is designed as a primer in coating systems where excellent durability is needed. They provide good corrosion resistance by cathodic protection. Zinc dust will sacrifice itself and protect the steel substrate which becomes the cathode. Here are some outstanding  characteristics of zinc-rich epoxy primers: Provides cathodic protection [...]

By |2020-11-08T09:08:20+03:30November 8th, 2020|Uncategorized|0 Comments