Darya Tamin LogoDarya TaminMarine & Industrial Protective Coatings
Transpoxy Intermediate – 219

Product details

Transocean

Transpoxy Intermediate – 219

Marine epoxy intermediate coat and sealer

General description

A two-component epoxy polyamide coating with good resistance to environmental conditions. Designed as an intermediate coat between organic or inorganic zinc-rich primers and finish coats; it can be overcoated with all Transocean products.

Technical data

Color: White (00), Grey(53)
Volume solids: %51
Density: 1.33 – 1.43 (Kg/Lit)
Base to hardener ratio (by volume): 50.5 to 19.5
Gloss: Matt
Film thickness and theoretical coverage
Coat type Dry film thickness per coat (μm) Wet film thickness per coat (μm) Theoretical coverage (m²/L)
Range 75–150 150–295 6.8–3.4
Recommended 100 195 5.1
  • Application method:

Stir thoroughly before application until the paint is uniform.

  • Pot life:

10 h at 10°C

8 h at 23°C

6 h at 30°C

4 h at 40°C

  • Conventional spray:

Nozzle pressure: 3 – 5 (bar)

Nozzle diameter: 1.5 – 2 (mm)

  • Airless spray:

Nozzle pressure: 120 – 180 (bar)

Nozzle diameter: 0.48 – 0.66 (mm)

Spray angle: 40 – 80 °

  • :

Suitable; apply multiple coats as needed. Recommended thinner addition: 0–5%.

Thinner: T-603
Application conditions: Maximum relative humidity: 85%.

Surface temperature must be at least 3°C above the dew point. Recommended surface temperature for application: 10–35°C.

Drying and overcoating times
Surface temperature Touch dry to Full cure Minimum overcoating interval Maximum overcoating interval
10°C 6 h 24 h 12 days 24 h 10 days
23°C 2 h 16 h 7 days 16 h 6 days
30°C 1 h 10 h 5 days 10 h 4 days
40°C 30 min 8 h 4 days 8 h 3 days

Download Technical Data Sheet (TDS)

Product document or image

Frequently asked questions about Transpoxy Intermediate – 219

What is Transpoxy Intermediate – 219 and what is it used for?

A two-component epoxy polyamide coating with good resistance to environmental conditions. Designed as an intermediate coat between organic or inorganic zinc-rich primers and finish coats; it can be overcoated with all Transocean products. For application limitations and service conditions, consult the product data sheet.

Which applications or surfaces is Transpoxy Intermediate – 219 suitable for?

See the product categories and suitable-for classifications on this page, and confirm the final selection against project conditions and the product data sheet.

What should I check in the data sheet before application?

Check substrate preparation, compatibility with adjacent coats, application method and environmental conditions. Follow the data sheet for component ratio, film thickness and drying times.

How can I request pricing and technical information?

Use the product inquiry link on this page or contact Daryatamin. The product data sheet is the reference for technical information and application conditions.

Price inquiry

Contact Daryatamin sales for pricing on this product.

Email the sales team

Leave a comment

Your email address will not be published.