Product details
Transocean
Transozinc Silicate Shopprimer – 9153
Marine silicone heat-resistant coating
General description
An ethyl-silicate shop primer with zinc pigment. It provides corrosion resistance, good heat resistance and low zinc-salt formation.
General properties
An ethyl-silicate shop primer with zinc pigment. It provides corrosion resistance, good heat resistance and low zinc-salt formation.
Technical properties
| Mixing ratio: | Component A to component B (by volume): 55 to 45 |
|---|
Before mixing the components, mix the zinc paste thoroughly. Gradually add the resin to the paste while mixing until the paint is homogeneous, preventing lumps from forming. If coarse, insoluble particles remain, strain the paint to prevent spray equipment blockage.
| Pot life: | h at 10 °C, 8 h at 23 °C, 6 h at 30 °C |
|---|---|
| Color: | Reddish brown(66), Green(33) |
| Volume solids: | 33% |
| Density: | 1.30 – 1.40 (Kg/Lit) |
| Gloss: | Matt |
| Coat type | Dry film thickness per coat (μm) | Wet film thickness per coat (μm) | Theoretical coverage (m²/L) |
|---|---|---|---|
| Range | 20–30 | 60–90 | 16.5–11.0 |
| Recommended | 25 | 75 | 13.2 |
Application method
Stir thoroughly before application and keep the paint well mixed during application.
| Conventional spray: | Nozzle pressure 4 – 5 (bar) Nozzle diameter: 1.8 – 2.2 (mm) Thinner addition: 0 – 10 % |
|---|---|
| Airless spray: | Nozzle pressure 120 – 150 (bar) Nozzle diameter: 0.53 – 0.64 (mm) Spray angle: 40 – 80 ° Thinner addition: 0 – 3 % |
| Brush or roller: | Not recommended. |
| Thinner: | T-606 T-607 Thinner process coating . |
Drying and overcoating times:
| Surface conditions | Touch dry | to | Minimum overcoating interval | Maximum overcoating interval |
|---|---|---|---|---|
| Relative humidity 70%, 23°C | 10 min | 2 h | 3 days | Unlimited |
| Relative humidity 70%, 30°C | 5 min | 1 h | 2 days | Unlimited |

Frequently asked questions about Transozinc Silicate Shopprimer – 9153
What is Transozinc Silicate Shopprimer – 9153 and what is it used for?
An ethyl-silicate shop primer with zinc pigment. It provides corrosion resistance, good heat resistance and low zinc-salt formation. For application limitations and service conditions, consult the product data sheet.
Which applications or surfaces is Transozinc Silicate Shopprimer – 9153 suitable for?
See the product categories and suitable-for classifications on this page, and confirm the final selection against project conditions and the product data sheet.
What should I check in the data sheet before application?
Check substrate preparation, compatibility with adjacent coats, application method and environmental conditions. Follow the data sheet for component ratio, film thickness and drying times.
How can I request pricing and technical information?
Use the product inquiry link on this page or contact Daryatamin. The product data sheet is the reference for technical information and application conditions.
Price inquiry
Contact Daryatamin sales for pricing on this product.
Email the sales team